FORGINGS

Forgings: We can supply forging pieces in different alloys in closed forgings and in open-die forgings.

Information about manufacturing process of forging:

Manufacturing process involving the shaping of metal using localized compressive forces. Forging is often classified according to the temperature at which it is performed: “cold”, “warm”, or “hot” forging. Forged parts can range in weight from less than a kilogram to metric tons. Forged parts usually require further processing to achieve a finished part.

Drop forging:  Is a forging process where a hammer is raised up and then “dropped” onto the workpiece  to deform it according to the shape of the die. There are two types of drop forging: open-die drop forging and closed-die drop forging. As the names imply, the difference is in the shape of the die, with the former not fully enclosing the workpiece, while  the latter does.

Open-die drop forging:  In open-die forging, a hammer strikes and deforms the workpiece, which is placed  on a stationary anvil. Open-die forging gets its name from the fact that the dies (the surfaces that are in contact with the workpiece) do not enclose the workpiece, allowing it to flow except where contacted by the dies. Therefore the operator needs  to orient and position the workpiece to get the desired shape. Open-die forging may also orient the grain to increase strength in the required direction.

Forging rings hot rolled:
Inside our forgings you can find the possibitliy to supply rings forged and hot-rolled